2.9inch Capacitive Touch e-Paper Display HAT for Raspberry Pi 5-Points 296×128

$29.44 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location:
Ships to: US,
Item: 195323788116

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
2.9inch Touch e-Paper HAT:2.9inch Touch e-Paper HAT
Waveshare:Waveshare
Screen Size:2.9inch

eBay 2.9inch Touch E-Paper E-Ink Display HAT For Raspberry Pi, 5-Points Capacitive Touch, 296×128 Pixels, Black / White, SPI Interface 2.9″ TOUCH E-PAPER HAT FOR RASPBERRY PI Capacitive Touch, Partial Refresh, Low Power, Wide Viewing Angle, Paper-Like Effect Ideal for price tags, shelf labels, industrial instruments… Size2.9″ Resolution296×128 Viewing Angle>170° Display ColorBlack and White Grey Scale2 Touch TypeCapacitive Touch Points5-Points Touch PortI2C Touch PanelToughened Glass CommunicationSPI Power ConsumptionUltra Low Display DurationPersists without Power Display PanelE-paper ExperiencePaper-like Comfortably ReadingEye Care, No Bluelight EnvironmentAmbient Light Required Display TypePassively Reflective RefreshingPartial Refresh Support Features At A Glance 2.9inch capacitive touch ePaper module, 296×128 resolution 5-points touch support, user-defined wakeup gesture No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards Reversed control interface, for connecting with controller boards like Arduino/STM32, etc. Comes with development resources and manual (examples for Raspberry Pi) Specifications OPERATING VOLTAGE 3.3V/5V DISPLAY COLOR black, white INTERFACE 3-wire SPI, 4-wire SPI GREY SCALE 2 OUTLINE DIMENSIONS 89.10 × 42.70mm PARTIAL REFRESH TIME 0.3s DISPLAY SIZE 66.89 × 29.05mm FULL REFRESH TIME 2s DOT PITCH 0.227 × 0.226mm REFRESH POWER 26.4mW (typ.) RESOLUTION 296×128 pixels STANDBY CURRENT <0.01uA (almost none) TOUCH POINTS 5 VIEWING ANGLE >170° Advantages Of EINK E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect. Standard Raspberry Pi 40PIN GPIO Header Compatible With Raspberry Pi Series Boards Raspberry Pi in the photo is NOT included. Reversed Control Interface I2C Bus For Touch Panel, SPI Bus For Display VCC 3.3V/5V GND GND DIN SPI MOSI pin CLK SPI SCK pin CS SPI chip selection, low active DC Data / Command selection (high for data, low for command) ERST External reset, low active BUSY Busy status output, high active INT Touch controller interrupt pin SCL Touch controller I2C clock pin SDA Touch controller I2C data pin TRST Touch controller reset, low active EN Touch control power supply enable (optional), high active Touch Control Power Supply Configuration The Touch Control Power Supply Is Determined By The Position Of 0R Resistor 0R RESISTOR POSITION TOUCH CONTROL POWER SUPPLY DESCRIPTION A VCC always powered by VCC (default) B EN controlled by user I/O C VEN controlled with ePaper (ERST) NC GND no power supply for touch control Demonstration Outline Dimensions Development Resources Wiki: https://www.waveshare.com/wiki/2.9inch_Touch_e-Paper_HAT Package contains 2.9inch e-Paper HAT x1 1

Frequently Asked Questions About 2.9inch Capacitive Touch e-Paper Display HAT for Raspberry Pi 5-Points 296×128 in My Website

law2g.com is the best online shopping platform where you can buy 2.9inch Capacitive Touch e-Paper Display HAT for Raspberry Pi 5-Points 296×128 from renowned brand(s). law2g.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 2.9inch Capacitive Touch e-Paper Display HAT for Raspberry Pi 5-Points 296×128 on law2g.com?

2.9inch Capacitive Touch e-Paper Display HAT for Raspberry Pi 5-Points 296×128

Frequently Asked Questions About 2.9inch Capacitive Touch e-Paper Display HAT for Raspberry Pi 5-Points 296×128 in My Website

What are the best-selling 2.9inch Capacitive Touch e-Paper Display HAT for Raspberry Pi 5-Points 296×128 on law2g.com?

Recent Posts

Recent Comments