Primer Sealer Non-Sanding 1K Ready to Spray GALLON in 4 Colors High Teck

$102.98 Buy It Now or Best Offer
free,30-Day Returns

Seller Store ssto3292
(14955) 99.9%,

Location: Clearwater, Florida
Ships to: US,
Item: 114899407985

Return shipping will be paid by:Buyer
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
High Teck:High Teck
Type:Primer Sealer
Items Included:Primer
Manufacturer Part Number:778–1
Country/Region of Manufacture:United States
California Prop 65 Warning:Cancer, Birith Defects or Other Reproductive Harm

HIGH TECK 1k NON-SANDING PRIMER/SeALER GALLONGallon available in 4 different colors Black, Gray, Red, White National Rule Product High Teck 1K Primer/Sealer is an excellent quality, low build phenolic modified alkyd. 1K Primer/ Sealer is fast drying can create a uniform surface without a lot of film build. 1K Primer/Sealer provides excellent adhesion to fully cured painted surfaces, treated and primed steel, properly prepared aluminum and fiberglass. 1K Primer/Sealer may be topcoated with a variety of topcoats such as basecoat, lacquer or enamelShake this product throughly before using Surface Preparation Solvent wash surface with a good grade wax and grease remover and wipe dry with a clean cloth. Sand original paint and repair damaged areas with a good quality non-staining body filler. For spot repairs, scuff sand area where sealer will be applied. For overall refinishing, scuff sand the entire car with 320 grit sandpaper or fine scuff pad. Apply one to two single wet coats of 1K Primer/Sealer to achieve the uniform color desired.Mixing Directions Sealer is Ready to Spray, Shake throughly before usingApplication Adjust air pressure at the gun to 30-45 psi for siphon feed guns. Use less pressure to minimize over spray on small jobs. Apply 1-2 medium wet coats at a gun distance of 8-12 inches as needed. Allow 5 to 15 minutes flash time between coats. Recoat times will vary with temperature, air movement and film thickness. Insufficient flash time will promote slow hardness development of the topcoat system. Allow final coat to dry 30 minutes to 1 hour before topcoat. Must be top coated with-in 12 hours after that scuff or sand before top coating. Recommended Film Thickness: 1.0 to 2.0 milsDry Times Dry times are based on recommended film thickness and are dependent on ambient temperature. Excessive film thicknesses, low temperature and poor air movement will retard dry times

Frequently Asked Questions About Primer Sealer Non-Sanding 1K Ready to Spray GALLON in 4 Colors High Teck in My Website

law2g.com is the best online shopping platform where you can buy Primer Sealer Non-Sanding 1K Ready to Spray GALLON in 4 Colors High Teck from renowned brand(s). law2g.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Primer Sealer Non-Sanding 1K Ready to Spray GALLON in 4 Colors High Teck on law2g.com?

Primer Sealer Non-Sanding 1K Ready to Spray GALLON in 4 Colors High Teck

Frequently Asked Questions About Primer Sealer Non-Sanding 1K Ready to Spray GALLON in 4 Colors High Teck in My Website

What are the best-selling Primer Sealer Non-Sanding 1K Ready to Spray GALLON in 4 Colors High Teck on law2g.com?

Recent Posts

Recent Comments