Digital Multimeter AC DC Volt Tester Amp Multi Meter Auto Range Clamp Adapter US

$43.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store hoperise_us
(421) 98.6%,

Location: Rancho Cucamonga, California
Ships to: US,
Item: 135264360538

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
HoldPeak:HoldPeak
MPN:Does not apply
Display:Digital
Test/Measurement Functions:AC Current,AC Voltage,DC Current,DC Voltage,Capacitance,Continuity Test,Diode Test,Duty Cycle,Frequency (Hz),Inductance,Resistance,Temperature,Relative Measurement
Features:Auto Power Off,Auto-Ranging,Backlight,Data Hold,True RMS
DC Voltage Range:60mV, 600mV, 6V, 60V, 600V, 1000V
AC Voltage Range:60mV, 600mV, 6V, 60V, 600V, 750V
Resistance Range:600Ω, 6kΩ, 60kΩ, 600kΩ, 6MΩ, 60MΩ

About the HP-770HC-APP Multimeter HP-770HC Upgrade Version) High Accuracy and Wide Multimeter Automatic range of 6000 counts. DC voltage range: 60 mV to 1000 V; AC voltage range: 60 mV to 750 V; DC current range: 600 μA to 600 A; AC current range: 600 μA to 600 A; Resistance Range: 600Ω to 60mΩ; Temperature Range: -4 to 1832°F More practical functionsData retention, auto backlight, auto power off, function switch display, °C/°F, MAX/MIN, True RMS; with AC/DC 600A clamp. You can use it in your company, factory, etc., as well as your car and home appliance. Multifunction Meter Measure DC/AC voltage, DC/AC current, resistance, capacitance, frequency, relative value, temperature. Diode test, triode test hFE, off-on test, non-contact voltage measurement (NCV)Bluetooth connect to phone Mechanical Blocking System This is a function of the device. You must turn the dial before inserting the reader. You can also turn the dial after pulling out the test lead. This function prevents a short circuit.DC voltage: 60mV / 600mV / 6V / 60V / 600V ± (0.5% + 2dgt) / 1000V ± (0.8% + 2dgt), AC Voltage:60mV/600mV/6V/60V/600V±(1.0%+10dgt)/750V±(1.5%+3dgt), (TRMS)DC Current:600uA/6000uA/60mA/600mA ±(1.5%+2dgt),6A/20A(±2.5%+5dgt); 600A (± 3.0% + 5dgt) AC current: 600uA / 6000uA / 60mA / 600mA ±(1.5% + 3dgt),6A / 20A (± 2.5% + 5dgt); 600A (± 3.0% + 5dgt), (TRMS)Resistance: 600Ω ~ 60MΩ Capacitance:6nF-60mF Frequency:9.999HZ-9.999mHZ Utilization rate:0.1%99.9%: Temperature: -20~150,150~1000 Diode detection:YES On-Off Detection:YES NCV:YES Holdpeak 605A AC/DC Current Adapter Adapting standard output banana plugs, this amperage clamp-on meter is compatible with most digital current testers. It enables your multitester measures current data up to 600A and allows your oscilloscope measures ampere waveform accurately.No need to break the circuit for amps measuring. Just clamp the big jaw caliber around one conductor under measured and get readings on multimeter.KINDLY REMINDER: Clamp on only ONE wire, or different direction current will offset and get wrong result.Specifications:DC Current: 600 AAC Current: 600 AJaw Caliber: 1.77 inchOutput Conversion: 1mV/1AConversion Accuracy: +/- 3.0% + 5 digitsOutput Impedance: 10KDimension: 7.05*3.54*1.42 inch 【AC/DC 600A Clamp-on Probe】Capable of measuring AC/DC up to 600 amps, This clamp adapter is built for higher current measurement. 【Great Companion Probe for DMMs】It’s recommended to use BT-605A with BTMETER multimeters: 770K, 770M,770HC-APP for easy accurate measurement. When use it with other brands multimeters, dial to mV range for ampere measurement, 1mV = 1A output 【Accurate Ampere Measurement】+/- 3.0%+10 accuracy for signal output conversion. The arrow on the Jaw indicates the DC current direction of positive current flow ( from positive to negative) 【Easy to Use】Maximum Jaw Caliber Size up to 1.77 inches (45mm), allows you to make accurate AC or DC amperage measurement up to 600 amps without breaking the circuit. 【Tips】Clamp the amp probe around the live wire only to get the current reading, or use an “AC line splitter”. 1mV = 1A output & standard 3/4 inch banana plugs makes it compatible with most multitesters that features with 1mV sensitivity. Operation Instructions: Perfectly work with Holdpeak multimeters, such as: 770M, 770N, 770K, 770HC-APP, etc. When perform DC current measurement, always press “REL” key on multimeter to zeroes it out. When perform AC current measurement, always use the clamp go round the live wire only, or use “AC line splitter” Connect the black banana plug of the BT-605A AC/DC Current Clamp Adapter to “COM” port and the red banana plug to the “µA mA” port. Press “SELECT” button on the multimeter and press AC/DC button on the Clamp Adapter to choose “DC” or “AC” measurement . The arrow on the right side of the Jaw indicates the DC current direction of positive current flow (from positive to negative). What’s in the package? (770HC-APP Multimeter+605A Adapter ) 1*Multimeter (770HC-APP)_ 1*Manual 1*Temperature Test Probe 1*Carrying bag 1*Test Lead 1*Adapter(605A)

Frequently Asked Questions About Digital Multimeter AC DC Volt Tester Amp Multi Meter Auto Range Clamp Adapter US in My Website

law2g.com is the best online shopping platform where you can buy Digital Multimeter AC DC Volt Tester Amp Multi Meter Auto Range Clamp Adapter US from renowned brand(s). law2g.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Digital Multimeter AC DC Volt Tester Amp Multi Meter Auto Range Clamp Adapter US on law2g.com?

Digital Multimeter AC DC Volt Tester Amp Multi Meter Auto Range Clamp Adapter US

Frequently Asked Questions About Digital Multimeter AC DC Volt Tester Amp Multi Meter Auto Range Clamp Adapter US in My Website

What are the best-selling Digital Multimeter AC DC Volt Tester Amp Multi Meter Auto Range Clamp Adapter US on law2g.com?

Recent Posts

Recent Comments