Digital Stormer Viscometer Paint Viscosity Meter Tester KU CP G Temp Display

$466.55 Buy It Now or Best Offer
free,30-Day Returns

Seller Store vividdel
(54) 100.0%,

Location: Monroe Township, New Jersey
Ships to: US,
Item: 176652452790

Restocking Fee:No
Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Features *:FAST SHIPPING
Shipping notice:Can not ship to Puerto Rico/Alaska/Hawaii
Unbranded:Unbranded
MPN:Does Not Apply
Custom Bundle:Yes

Description Stormer viscometer is a test instrument used to determine the viscosity of paint and other paints with KU value. This instrument can simultaneously display the KU value, CP (centipoise), g (gram), and room temperature of the measured sample viscosity. The design basis of this instrument is ASTM-D562 standard and GB9269-88 standard. Specifications *Measuring range: 40.2KU-141.0 KU (KU) value 32g-1099g (load value), 27 cp-5250cp Measurement accuracy: ±2% of full scale Measurement repeatability : ±1% of full scale The stirring shaft speed: 200 r/min±0.5 r/min *Container capacity: about 500ml *Input voltage: 110V 60HZ *Power: 10W Weights&Dimensions Dimensions: 210mm*180mm*500mm (length * width * height) Weight: 10kg What’s Included? 1*Stormer host 1*paddle 1*Measuring cup 1*Instruction 1*Certificate Features&Highlights This instrument is controlled by a microcomputer. The stirring blade is driven by a special constant speed motor to rotate at a speed of 200r/min. The resistance torque of the stirring blade rotating in the tested sample is converted by the computer to KU value (Krebs K rebs) unit (KU) to produce 200 A logarithmic function of the load required for r/min speed, generally used to express the viscosity for brushing and rolling). The operator only needs to insert the stirring blade into the sample to be tested to the specified depth, and the KU value corresponding to the sample can be directly read from the instrument, CP (centipoise) g (gram). Test environment: 1. The instrument should be placed on a firm and flat surface away from the interference of strong air currents, strong magnetic fields, strong electric fields, and strong electric pulses. 2. To ensure the safety of the operator, the power socket in the laboratory should be reliably grounded. 3. The temperature in the laboratory should be 23℃±2℃, and the relative humidity should be no more than 75℃. 4. The temperature of the sample should be 23℃±0.2℃. Operation and use: 1. Take the instrument out of the box and place it on the workbench. 2. Take out the stirring blade from the packaging box, insert it into the sleeve of the rotating shaft according to the outline drawing, and fix it with the jacking screw. Note that the jacking screw should be on the flat opening of the stirring blade. 3. Plug in the power plug and turn it on without the power switch, the LCD will display the KU value, and the ￠ g reading is zero. 4. Put the sample to be tested into the container that comes with the instrument, and the liquid level is about 10mm away from the container mouth. 5. Place the container with the sample to be tested on the container base, press down the lifting handle, and immerse the stirring blade in the sample to be tested, and the mark on the shaft of the stirring blade is flush with the liquid surface. The instrument automatically starts to run. 6. After a few seconds, the display will display the KU value of the sample to be tested, CP (centipoise) g (gram) (the sample to be tested must be stirred for a few seconds to achieve uniformity, that is, dynamic equilibrium, the data displayed at this time is accurate) 7. After the measurement is over, raise the lifting handle to a high place, and there is a limit device near the highest position, which can keep the instrument in this position. The instrument stops rotating and enters the standby state again. Matters needing attention 1. There are precision measuring parts in the chassis of this instrument, so handle it with care. 2. This instrument is a special-purpose instrument, if special personnel do not disassemble the outer shell of the instrument, so as not to affect the measurement accuracy of the instrument. 3. When the instrument is temporarily not in use, the lifting handle of the instrument should be kept on the upper limit device, and should not be placed in a lower position, otherwise it may cause inflexible lifting. 4. It should be sent to the relevant metrological supervision department for inspection once a year. 5.The propeller blade is a sensor connected to the instrument. When rotating the propeller blade, please do not pinch it by hand. Similarly, when installing the propeller blade, in order to align the deflection of the stirring propeller blade with the tightening screw, do not vigorously rotate the sleeve of the shaft, otherwise it will damage the sensor and cause measurement errors. Method: Press down the lifting handle to make the instrument idle, rotate it to a suitable position, and then install the blade 6. This product comes with a one-year warranty. If the instrument is damaged due to improper use or human error, it is not covered by the warranty On Oct 28, 2024 at 20:08:11 PDT, seller added the following information:

Frequently Asked Questions About Digital Stormer Viscometer Paint Viscosity Meter Tester KU CP G Temp Display in My Website

law2g.com is the best online shopping platform where you can buy Digital Stormer Viscometer Paint Viscosity Meter Tester KU CP G Temp Display from renowned brand(s). law2g.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Digital Stormer Viscometer Paint Viscosity Meter Tester KU CP G Temp Display on law2g.com?

Digital Stormer Viscometer Paint Viscosity Meter Tester KU CP G Temp Display

Frequently Asked Questions About Digital Stormer Viscometer Paint Viscosity Meter Tester KU CP G Temp Display in My Website

What are the best-selling Digital Stormer Viscometer Paint Viscosity Meter Tester KU CP G Temp Display on law2g.com?

Recent Posts

Recent Comments