Enviro-Safe's, EASY SEAL, PROSEAL XL4 Direct Inject Up to 1.5 Ton Systems

$38.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location: Hartford, Wisconsin, United States
Ships to: US,
Item: 404165609511

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Enviro-Safe:Enviro-Safe
Color:Gold
Type:A/C Leak Sealer Kit
Refrigerant Type:R-12
UPC:0816024009055
Enviro-Safe ProSeal XL4:Enviro-Safe ProSeal XL4
MPN:NOT SPECIFIED

eBay Gregoriou Brothers Refrigeration Since 1979 Frosty-Freeze Enviro-Safe’s, EASY SEAL, PROSEAL XL4 Direct Inject Up to 1.5 Ton Systems ProSeal XL4 Inject For Systems up to 1.5 tons in sizePart# 2100A1-1.5 Envirosafe Direct Inject (goes on the end of your hose and the system connection) Refrigerant Leak Sealant Super Concentrate Treats Systems up to 1.5 Tons or 18,000 BTU’s Concentrated Reinforced clear hose Easy product injecting viewing (you know its going in!!) Easiest Sealant to Install Permanent Seal Works with All Refrigerants (excluding ammonia) Professional Use Only 1/4″ male Flare fitting inlet 1/4′ Female flare swivel with valve core depressor outlet or system connection. System pump down not required Good for R410a systems One time use! Directions on back of box. One of our most requested products, Enviro-Safe® ProSeal XL4 Inject is a small, concentrated, easy inject refrigerant leak sealant. Good for systems that are up to 1.5 tons or 18000 BTU’s. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, micro-channel coils, coolers, and commercial units. Enviro-Safe&; has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. Unlike most other products on the market, ProSeal XL4 travels with the gas, which makes it faster, and more effective at finding leaks. ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions. *DO NOT use in ammonia systems. Eliminate the tedious, and time consuming process of “pumping down the unit”. Simply Connect and Inject. Enviro-Safe’s ProSeal XL4 Inject is: Concentrated Compatible with all refrigerant, except ammonia Compatible with all oils No need to pump down R410, or other units Large equipment, bulky tools, injection hoses are a thing of the past For Use In: heat pumps split systems & mini split units packaged units micro-channel coils We are a Certified UPS Hazardous Materials Shipper for the United States and Canada. This item ships with UPS Ground or USPS Parcel Select, First Class Ground only, under the ORM-D exception under Limitied Quantities as a Hazardous Materials Package according to USDOT 49 CFR. ProSeal XL4 Inject For Systems up to 1.5 tons in sizePart# 2100A1-1.5 Envirosafe Direct Inject (goes on the end of your hose and the system connection) Refrigerant Leak Sealant Super Concentrate Treats Systems up to 1.5 Tons or 18,000 BTU’s Concentrated Reinforced clear hose Easy product injecting viewing (you know its going in!!) Easiest Sealant to Install Permanent Seal Works with All Refrigerants (excluding ammonia) Professional Use Only 1/4″ male Flare fitting inlet 1/4′ Female flare swivel with valve core depressor outlet or system connection. System pump down not required Good for R410a systems One time use! Directions on back of box. One of our most requested products, Enviro-Safe® ProSeal XL4 Inject is a small, concentrated, easy inject refrigerant leak sealant. Good for systems that are up to 1.5 tons or 18000 BTU’s. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, micro-channel coils, coolers, and commercial units. Enviro-Safe&; has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. Unlike most other products on the market, ProSeal XL4 travels with the gas, which makes it faster, and more effective at finding leaks. ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions. *DO NOT use in ammonia systems. Eliminate the tedious, and time consuming process of “pumping down the unit”. Simply Connect and Inject. Enviro-Safe’s ProSeal XL4 Inject is: —Concentrated —Compatible with all refrigerant, except ammonia —Compatible with all oils —No need to pump down R410, or other units —Large equipment, bulky tools, injection hoses are a thing of the past For Use In: —heat pumps —split systems & mini split units —packaged units —micro-channel coils Gregoriou Brothers Refrigeration Since 1979 Frosty-Freeze Enviro-Safe’s, EASY SEAL, PROSEAL XL4 Direct Inject Up to 1.5 Ton Systems ProSeal XL4 Inject For Systems up to 1.5 tons in sizePart# 2100A1-1.5 Envirosafe Direct Inject (goes on the end of your hose and the system connection) Refrigerant Leak Sealant Super Concentrate Treats Systems up to 1.5 Tons or 18,000 BTU’s Concentrated Reinforced clear hose Easy product injecting viewing (you know its going in!!) Easiest Sealant to Install Permanent Seal Works with All Refrigerants (excluding ammonia) Professional Use Only 1/4″ male Flare fitting inlet 1/4′ Female flare swivel with valve core depressor outlet or system connection. System pump down not required Good for R410a systems One time use! Directions on back of box. One of our most requested products, Enviro-Safe® ProSeal XL4 Inject is a small, concentrated, easy inject refrigerant leak sealant. Good for systems that are up to 1.5 tons or 18000 BTU’s. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, micro-channel coils, coolers, and commercial units. Enviro-Safe&; has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. Unlike most other products on the market, ProSeal XL4 travels with the gas, which makes it faster, and more effective at finding leaks. ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions. *DO NOT use in ammonia systems. Eliminate the tedious, and time consuming process of “pumping down the unit”. Simply Connect and Inject. Enviro-Safe’s ProSeal XL4 Inject is: Concentrated Compatible with all refrigerant, except ammonia Compatible with all oils No need to pump down R410, or other units Large equipment, bulky tools, injection hoses are a thing of the past For Use In: heat pumps split systems & mini split units packaged units micro-channel coils We are a Certified UPS Hazardous Materials Shipper for the United States and Canada. This item ships with UPS Ground or USPS Parcel Select, First Class Ground only, under the ORM-D exception under Limitied Quantities as a Hazardous Materials Package according to USDOT 49 CFR. ProSeal XL4 Inject For Systems up to 1.5 tons in sizePart# 2100A1-1.5 Envirosafe Direct Inject (goes on the end of your hose and the system connection) Refrigerant Leak Sealant Super Concentrate Treats Systems up to 1.5 Tons or 18,000 BTU’s Concentrated Reinforced clear hose Easy product injecting viewing (you know its going in!!) Easiest Sealant to Install Permanent Seal Works with All Refrigerants (excluding ammonia) Professional Use Only 1/4″ male Flare fitting inlet 1/4′ Female flare swivel with valve core depressor outlet or system connection. System pump down not required Good for R410a systems One time use! Directions on back of box. One of our most requested products, Enviro-Safe® ProSeal XL4 Inject is a small, concentrated, easy inject refrigerant leak sealant. Good for systems that are up to 1.5 tons or 18000 BTU’s. ProSeal XL4 Inject is compatible with all refrigerants except ammonia. This product performs best in heat pumps, split and mini- split units, packaged units, micro-channel coils, coolers, and commercial units. Enviro-Safe&; has been producing and packaging sealants for over 17 years. Our Sealant Injector hose was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. Unlike most other products on the market, ProSeal XL4 travels with the gas, which makes it faster, and more effective at finding leaks. ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. Sealing leaks will save energy and lower refrigerant emissions. *DO NOT use in ammonia systems. Eliminate the tedious, and time consuming process of “pumping down the unit”. Simply Connect and Inject. Enviro-Safe’s ProSeal XL4 Inject is: Concentrated Compatible with all refrigerant, except ammonia Compatible with all oils No need to pump down R410, or other units Large equipment, bulky tools, injection hoses are a thing of the past For Use In: heat pumps split systems & mini split units packaged units micro-channel coils

Frequently Asked Questions About Enviro-Safe’s, EASY SEAL, PROSEAL XL4 Direct Inject Up to 1.5 Ton Systems in My Website

law2g.com is the best online shopping platform where you can buy Enviro-Safe’s, EASY SEAL, PROSEAL XL4 Direct Inject Up to 1.5 Ton Systems from renowned brand(s). law2g.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Enviro-Safe’s, EASY SEAL, PROSEAL XL4 Direct Inject Up to 1.5 Ton Systems on law2g.com?

Enviro-Safe's, EASY SEAL, PROSEAL XL4 Direct Inject Up to 1.5 Ton Systems

Frequently Asked Questions About Enviro-Safe’s, EASY SEAL, PROSEAL XL4 Direct Inject Up to 1.5 Ton Systems in My Website

What are the best-selling Enviro-Safe’s, EASY SEAL, PROSEAL XL4 Direct Inject Up to 1.5 Ton Systems on law2g.com?

Recent Posts

Recent Comments