Mid-year On Sale!Geeetech 3D Printer accessories+filament, sold as a package

$17.09 Buy It Now or Best Offer
free,30-Day Returns

Seller Store geeetech-gooddeal
(4850) 99.3%,

Location: Los Angeles
Ships to: US,
Item: 126529032877

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Geeetech:Geeetech
Type:Filament
Material:PLA
Filament Diameter:1.75 mm
Unit Quantity:2.2
Unit Type:lb
Country/Region of Manufacture:China
Manufacturer Warranty:3 Months

618 Mid-Year Sale Geeetech 3D printer Filaments+accessories, clearance sale, lowest price ever ，first come first served Upgraded GEEETECH GLA10 V2 Auxiliary Leveling Device Elveler for FDM 3D printer Tips: 1. Please read this manual carefully for using GLA10-V2 correctly. 2. Please scan the QR code or log in to our website to get the G-code file that GLA10-V2 needs. 3. Please pay attention to safety when leveling the GLA10-V2 hot bed, so as not to hurt your fingers by the moving hot end. 4.when using the GLA10-V2, adjust the leveling screws under the hot bed ,when the green LED flashing ,it means the corner is (almost) ready to go . 5.GLA10-V2 is only applicable to 3D printers with adjustable nuts on the hot bed . Leveling Preparation 1. Install the included CR2032 battery in the battery holder on the GLA10-V2 , take care not to install the wrong positive and negative terminals when installing the battery. 2. Please enter the URL https://www.geeetech.com/wiki/index.php/GLA10-V2 in the browser, or scan the QR code below to visit our website. Then download the GLA10-V2 related G- code file. We provide the corresponding G-codes for different hotbed sizes. The files with the “Level” mark are the leveling auxiliary files, and the G-code files with the “Test” mark are the test files after the adjustment is completed. 3. Please select the correct G-code file according to the size of your 3D printer heat bed, copy the G-code to the Micro SD card and insert it into the printer. 4. Please clean up the residual filament on the nozzle so as not to affect the leveling accuracy. Start Leveling 1. Power on the 3D printer, select the leveling auxiliary G-code pre-installed in the Micro SD, and start the hotbed leveling.The leveling auxiliary G-code will pause at the four corners of the hot bed for 25s respectively. After 25s, the nozzle will move to the next point. After the pause at the fourth corners, the printer will exit the leveling. 2. After the leveling starts, the nozzle of the printer will automatically lift a certain distance. At this time, please place the end of the GLA10-V2 with a cross pattern under the nozzle, and ensure that the nozzle is directly above the cross pattern of the GLA10-V2. 3. At this time, please press and fix the other end of the GLA10-V2 with one hand, and then quickly adjust the bot bed leveling nut corresponding to the current position of the nozzle with the other hand. When you see the green LED on the GLA10-V2 just lit up, or hear the buzzer sound , it means that the current height of the hot bed is just right. At this time , please take the GLA10-V2 out from under the hot end and wait for the hot end to move to the next position of the hot bed . Take care to make sure that GLA10-V2 is just lit up at all four corners of the hot bed , or that the buzzer has just lit up . 4. After leveling, please use the downloaded test G-code to verify the leveling effect. 5. If any problem is found during the leveling test, please re-level the hot bed . Parameter Battery parameter：CR2032,3V Product size：90（L）*35（W）*14（H）mm Packing size：115（L）*75（W）*40（H）mm Product weight：19g Packing weight：57g THUNDER thickened Teflon tube [outer diameter 6mm, inner diameter 2mm, length 1M, with 2 PC06-M6, 2 PC06-01 pneumatic connectors] Parameter: Product name: PTFE tube (Teflon tube) Product color: transparent Temperature range: -190℃~260℃ Specifications: inner diameter 2mm, outer diameter 6mm Practical scope: suitable for 1.75mm consumables Product features: corrosion resistance, high and low temperature resistance, unique self-lubrication, aging resistance, etc. Features: 1. Corrosion resistance, able to withstand the action of all strong acids (including aqua regia), strong oxidants, reducing agents and various organic solvents except molten alkali metals, fluorinated media and sodium hydroxide above 300 °C 2. Insulation resistance, not affected by the environment and frequency, the volume resistance can reach 1000 ohms, the dielectric loss is small, and the breakdown voltage is high. 3. High and low temperature resistance, little effect on temperature, wide temperature range, usable temperature -190℃~260℃ 4. Unique self-lubricating property, with the friction coefficient of plastics, it is an ideal oil-free lubricating material 5. The protruding surface is not sticky, and none of the known solid materials can adhere to the surface 6. Radiation resistance and low permeability, long-term exposure to the atmosphere, the surface and performance remain unchanged 7. Incombustibility, the oxygen limit index is below 90. Package Included: 1、1*1m PTFE tube 2、2*PC06-M6 2*PC06-01 3、4 *C-shaped fixed buckle Upgrade Geeetech 3D Printer Platform Tempered Glass Bed Plates 210x200x3mm About this item: If you are going to use the superplate glass to replace the black mylar sticker, one tip need your attention please, in case of the nozzle touch and scrach the platform: Because the superplate glass is 3mm thicker than mylar sticker, After you replace the glass with existing mylar sticker, pls remember to up the limit switch on Z axis for about 3mm, then do leveling before you start printing and you can also slightly adjust the knob under platform. We choose silicon carbide glass with microporous coating as the building platform for 3D printer, without the need of attaching the masking tape. The silicon carbide glass is of chemical stability, high heat conductivity coefficient and good wear-resistance and can withstand extreme temperature. The special coating is inorganic and has a hardness of 8 Mohs, hence of high durability. Compared with common building platform, this kind of tempered glass is of better adhesion and flatness and easy to take prints off. Besides, it is easy to clean with water or alcohol. Geeetech Superplate silicon carbide glass platform is regarded as a reliable building platform by 3D printing hobbyists. Features: Better adhesion: Superplate is coated with micropores, having strong adhesion during printing. High-performance: The silicon carbide glass is of chemical stability, high heat conductivity coefficient and good wear-resistance and can withstand extreme temperature. Reliability: The special coating is inorganic, with its hardness of 8 Mohs and heat resistance up to 400 ℃. Easy to clean with water or alcohol. Easy to remove your print by hand without the help of scraper. Geeetech 3D Printer Aluminum Plate 235x235x3mm Hot Bed Kit for A10 A10M A10T US NOTE: Buy it before confirmed it is same with yours Product Description Size: 235*235*3mm Kit: thermistor and hot bed wire welded Suitable for: Geeetech A10, A10M, A10T Packet include： 1* Aluminum PlateHot Bed Kit Geeetech 3D Printer Glass Superplate 235mm*235mm*3mm Excellent Adhesion US Information: if you are going to use the superplate glass to replace the black mylar sticker, one tip need your attention please, in case of the nozzle touch and scrach the platform: Because the superplate glass is 3mm thicker than mylar sticker, After you replace the glass with existing mylar sticker, pls remember to up the limit switch on Z axis for about 3mm, then do leveling before you start printing and you can also slightly adjust the knob under platform. We choose silicon carbide glass with microporous coating as the building platform for 3D printer, without the need of attaching the masking tape. The silicon carbide glass is of chemical stability, high heat conductivity coefficient and good wear-resistance and can withstand extreme temperature. The special coating is inorganic and has a hardness of 8 Mohs, hence of high durability. Compared with common building platform, this kind of tempered glass is of better adhesion and flatness and easy to take prints off. Besides, it is easy to clean with water or alcohol. Geeetech Superplate silicon carbide glass platform is regarded as a reliable building platform by 3D printing hobbyists. Features: Better adhesion: Superplate is coated with micropores, having strong adhesion during printing. High-performance: The silicon carbide glass is of chemical stability, high heat conductivity coefficient and good wear-resistance and can withstand extreme temperature. Reliability: The special coating is inorganic, with its hardness of 8 Mohs and heat resistance up to 400 ℃. Easy to clean with water or alcohol. Easy to remove your print by hand without the help of scraper. Size: 235mm*235mm*3mm Geeetech Single Hot End Kit 0.4mm Head Extruder for A10 A20 3D Printer One in and one out of the extrusion head Description This 1-in-1 out hot end kit is designed for A10,A20,A30,A30_Pro 3D printer. It can greatly reduce the risk of clogging or jamming so as to save filament for you. With its good craftsmanship, filament could be printed out of amazing prints. Besides, its standard 0.4mm nozzle delivers satisfactorily smooth surface finish. Printing enriches your daily life~ Specification: 1.Number of filaments:1 2.Filament material: PLA/ABS 3.Filament size:1.75mm 4.Nozzle size:0.4mm 5.Heater cartridge:24V,40W;diameter & length:6mm*20mm 6.Thermistor: PT3-25E2-S2 Geeetech 3D Printer Parts MK2A PCB Heatbed Hot bed 216*216*2mm Universal Red Product name: MK2A PCB Heatbed 3D Printer Parts Voltage：24V Product size: 216mm*216mm*2mm Box size：28*26.5*3.9cm Material:PCB Weight：0.3kg Product function: Equipped with Me Creator2 machine hot bed heating GEEETECH A10M A20M 2 in 1 out Mix Color Hotend Kit 0.4mm Nozzle Hot 3d Printer Description This 2 in 1 out hotend kit is designed for Geeetech A10M and A20M 3D printer. It can greatly reduce the risk of clogging or jamming so as to save filament for you. With its good craftsmanship, two pieces of different color filament could uniformly mixed together to create amazing prints. Besides, its standard 0.4mm nozzle delivers satisfactorily smooth surface finish. Mix-color printing enriches your daily life~ Specifications: 1. Number of filaments: 2 2. Filament material: PLA/ABS 3. Filament size: 1.75mm 4. Nozzle size: 0.4mm 5. Heater cartridge: 20V, 40W; diameter & length: 6 *30mm 6. Thermistor: PT3-25E2-S2 7. Net weight: 89.60g 8. Gross weight: 140g GEEETECH 3D Printer Parts 3 in 1 Spring Steel Plate+PEI+Magnetic B Base 260*260 The combination includes: Steel spring plate+PEI+magnetic B base Feature: 1. PEI materials: allow your print to easily adhere to the printing surface, 2.It includes PEI printing surface + spring steel plate+ magnetic disk sticker 3.flexible and removable. 4.3-in-1 plate: steel spring plate + PEI + magnetic B base. 5.to withstand over 130 ℃ / 226ºF Installation process: 1.Simply glue a PEI to the top of the flexplate, 2.attach it to your print bed via the magnetic mounting base, do a one-time adjustment of the Z-height and start printing. 3.When the printing is complete, simply remove the flex plate, flex it and remove your prints! Geeetech Me Creator2 3D Printer Heat Bed Full Fixed Hotbed Kit 24V 152*152*1.6mm Product Description： Fully fixed hot bed kit, the aluminum plate and hot bed bracket are fixed with 12 screws. The height of the aluminum plate is not adjustable,which can greatly strengthen the strength of aluminum plate. Compared with the traditional hot bed, fixed hotbed can effectively avoid hot bed uneven due to thermal expansion and contraction when aluminum plate in heating. Hot bed kit includes: Aluminum plate(without rubber magnet), hot bed bracket, thermistor, hot bed power supply wire, pulley; Specification： Rated Voltage：24V Hot bed resistance：2.2Ω Rated Power：260W Packing Includes: 1x Hotbed Kit Geeetech 3D Printer Stainless Steel Filter Funnel Resin Filter Cup for UV Resin Description: The funnel is made of stainless steel, easy to use and clean, and effectively filters the contaminants while the resin is poured into the bottle The strainer are perfectly clean, tight and the mesh is the right size for filtering resin. Thanks to the funnel, the residues can be filtered back clean and suitable for filtering resin. Stainless steel filter (sits very well in the stainless steel funnel). More practical than the paper filter, simply wipe them out after use and clean them with isopropanol. Fits all conventional resin bottles with bottle neck width in 15 mm The stainless steel filter is not only for filtering the resin of the printers, but for any non-aggressive technical product, typically pouring paints and varnishes into spray guns using filter and avoiding clogging of the nozzle. Specification: Material: 304 Stainless Steel Size: 4.3 inches in diameter, 3.9 inches in height, stem length: 1.7 inches, diameter of the spout is 0.6 inches 1.The filter operating temperature within Acidic :0~80℃, alkaline:0~100℃ 2.Before using the filter, wash in warm and soapy water 3.Please clean stainless steel funnels after use Package Included: 1 x Stainless Steel Funnel 1x Strainer Filter Geeetch 3D Printer 42-40 Stepper Motor Extruder for 1.75mm Filament 3D Printer

Frequently Asked Questions About Mid-year On Sale!Geeetech 3D Printer accessories+filament, sold as a package in My Website

law2g.com is the best online shopping platform where you can buy Mid-year On Sale!Geeetech 3D Printer accessories+filament, sold as a package from renowned brand(s). law2g.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Mid-year On Sale!Geeetech 3D Printer accessories+filament, sold as a package on law2g.com?

Mid-year On Sale!Geeetech 3D Printer accessories+filament, sold as a package

Frequently Asked Questions About Mid-year On Sale!Geeetech 3D Printer accessories+filament, sold as a package in My Website

What are the best-selling Mid-year On Sale!Geeetech 3D Printer accessories+filament, sold as a package on law2g.com?

Recent Posts

Recent Comments