Paper Air Force P-47D Thunderbolt Flying Desk Model Kit – 1/41 Scale (12" wing)

Welcome
to the Paper Air Force Company!  

Introducing
the Paper Air Force “Cruiser” line of Flying Desk Models, a
highly detailed desk – sized model that is built with a real flying
air frame with working control surfaces and capable of flight.  
Included is a real working propeller, (also built from cardstock!)
that can be attached to a rubber band and will cruise the model
across the floor under power. Free spinning, the prop will turn when
“walked” around the room – a favorite mode of play for kids big
and small. Very sturdy due to its lightweight modular construction,
it can take more than a few falls and tumbles without serious damage,
and is easily repaired when necessary. A very special desk model!
A great value, this kit also comes with our very sturdy display stand
kit, also built from cardstock.

A
12 inch wingspan 1/41 scale P-47D Thunderbolt, razorback style. 
 Please note that rubber band, prop hook, and wheels are not
included.  Templates are included for wheels that can be made
from packaging foam. Everything else except spray paint, glue, and a
dab of paste, is included in the kit.

Please
search our test glide and build videos on the interwebs to see how
these kits are built, as well ask the “walkaround” introduction
video for this particular model. 

Pieces
are cut out with scissors from light card and paper.  All pieces
needed to complete the basic airframe are included in the kit.  Kit
consists of light card pieces and paper,  figure (picture) book
instructions, written instructions, peel -n- stick decals (5 separate
trims all included), and decal reference sheet.  White glue and
spray paint will be needed to complete the model as pictured.  

The
airframe is plenty strong, can take some punishment, and is easily
repairable.  Please note that the Paper Air Force Model Aircraft
Display Stand is included in this kit!  

Great
for an introduction to the world of modeling.  Makes a beautiful
desk model, glider, floor cruiser,  or with free spinning prop
which will turn with the slightest wind and control surfaces that can
be set in place!

This
kit includes the Paper Air Force Electric Standard Super Symmetrical
Paddle Blade propeller with replaceable blade system – a real working
propeller with an endless supply of replacement blades that can be
printed from your own printer. A great value.

Includes
kit for airframe only, card propeller, display stand and spinner. 
 Wheels not included.  Glue, paste, and accessories not
included.  Includes 5 separate decal markings.

The
Greatest Paper Airplane!  A fun project. 

Specs

Wingspan:
12″

Dry
Weight: 0.9 ounces

Balanced
Glide weight: 1.2 ounces

Control
surfaces: Flaps, Ailerons, Elevator, Rudder

5
historic decal liveries included. 

Materials
listed below are not included:

Materials
needed to complete the static airframe 

Comfortable
Scissors

White
Glue

Hobby
Knife

Spackling
Paste (at hardware store)

Sandpaper
(rough, medium, fine)

Spray
paint

Additional
Materials Needed for a Flying Model

Prop
hook and rubber band for rubber power

Twist
ties or flower arrangement wire to set control surfaces for free
flight.

Packing
or other foam for wheels.

Everything
else is included! 

Returns
– Please note that due to the copiable nature of the item, returns
cannot be accepted except in the case of defective materials. 
However, purchaser is provided permission to make as many additional
copies for their own personal use of the kit pieces and decals only. 
Make up to 5 different planes with the included decal set!